How to Clean a Rifle Scope Lens?

How to Clean a Rifle Scope Lens?

Only clean your riflescope lens when you notice a problem or when it affects your visibility. Minor dust or debris on the exterior of the lenses is unlikely to obstruct your view, so cleaning them should only be done when necessary. You should assess the need for cleaning scope lense. Clean your riflescope lenses only when visibility is compromised or if you notice any issues.

(Reading Time: 4-5 Minutes)

Cleaning a rifle scope lens requires care and attention to avoid damaging the delicate optical surfaces. I hope these tips help you keep your rifle scope lens clean and maintain its performance!

Here's A Step-by-step Guide To Clean A Rifle Scope Lens:

Tools: workspace, soft lens brush, cleaning solution, compressed air, lens cloth.

1. Prepare A Clean Workspace

Start by finding a clean and dust-free area to work on. Ideally, use a table with a soft cloth or towel laid out to prevent scratching the lens.

2. Use A Soft Lens Brush

Before wiping the lens, use a soft brush or air blower to gently remove any loose dust or debris without scratching the lens. This step helps prevent scratching the lens during the cleaning process. Start by using a soft lens brush, such as a lens pen, to gently sweep away any particles on your riflescope.


3. Choose The Right Lens Cleaning Solution

Apply a small amount of lens cleaning solution specifically designed for optical lenses onto a microfiber cloth. Avoid using harsh chemicals or household cleaners, as they may damage the lens coatings.

Water is the safest liquid to use for cleaning both the body and the lenses of your riflescope. If needed, you can also use a generic eyeglass cleaner or 90+% isopropyl alcohol, as they dry faster than water.

However, avoid using degreasers or cleaning solutions not recommended by the manufacturer, as they may damage the lens.


4. Gently Clean Lenses

Apply a small amount of the chosen cleaning solution to a microfiber cloth or lens cleaning tissue. Gently wipe the lenses in a circular motion, starting from the center and moving outward. Lightly wipe the lens surface in a circular motion, starting from the center and moving outward. Be gentle to avoid applying too much pressure or rubbing the lenses too vigorously, which could scratch the lens.

Repeat if Necessary: If there are stubborn smudges or marks on the lens, you may need to repeat the cleaning process. Use a fresh section of the microfiber cloth and apply more cleaning solution as needed.

5. Dry The Lenses

After cleaning, use a dry part of the cloth or a new lens cleaning tissue to remove any remaining moisture from the lenses. Make sure there are no streaks or residues left behind.

Ensure that the lenses are completely dry before using the riflescope again, inspect it carefully to ensure it is clean and free of any smudges or marks. If necessary, repeat the cleaning process until the lens is completely clean.

6. Protect The Lens

Consider using lens caps or covers to protect the lens from dust and debris when not in use. Store the rifle scope in a clean and dry environment to prevent contamination.

Remember, it's important to follow the manufacturer's guidelines for cleaning your specific rifle scope model to avoid any potential damage. Additionally, if you're unsure about the cleaning process, it's always a good idea to consult the manufacturer's instructions or seek professional assistance.


How Often Should I Clean The Lens?

The frequency of cleaning your rifle scope lens can vary depending on factors such as environmental conditions, frequency of use, and the level of dirt or debris accumulation.

However, here are some general guidelines, I hope these tips help you determine how often to clean your scope lens and maintain its performance:

- Preventive Measures: To minimize the need for frequent cleaning, it's advisable to use lens covers or caps when the riflescope is not in use. This helps protect the lens from dust, dirt, and other contaminants.

- Dust Removal: Before cleaning the lens, use a soft lens brush or compressed air to remove any loose dust or debris. This helps prevent scratching the lens during the cleaning process.

- Regular Maintenance: It is recommended to perform regular maintenance on your rifle scope, including cleaning the lens, to ensure optimal performance. This can be done every few months or after a significant amount of use.

- Visual Inspection: Regularly inspect the lens for any visible dirt, smudges, or debris. If you notice any significant buildup that affects your visibility, it's a good indication that cleaning is needed.

TIPS: It's important to follow the manufacturer's recommendations for cleaning your specific rifle scope model. They may provide specific instructions or guidelines on the frequency of cleaning and the use of cleaning solutions.


Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.